Click "OK" button once and close this pop up.the rest is up to you to poke around and figure out what's best for your image.Live Preview: check (Inkscape v1.x: click "Update" button to preview).Inkscape v1.0/1.1: use "Multiple scans > Colours".Use the following optimal settings (using Inkscape 0.92 here, v1.x is slightly different):.Select the image, then "Path" > "Trace Bitmap".Import an image, preferably a black and white image onto the blank canvas.For L1/Pro, choose your settings carefully at generation time as these can't be changed via the app.Ĭlick to watch video tutorial (using Inkscape 0.92 here, v1.x looks slightly different): You can use arbitrary settings for power and speed if you are generating Gcode for LP2 or newer LP engravers, because these settings will be overridden by the app's power and depth settings.This is a hard limit by the engravers' physical memory. Generated Gcode file should not exceed 1MB each for L1/Pro, or 4MB each for LP2.txt otherwise the LaserPecker App won't recognise it. This extension will automatically center your graphics in the LP's engraving range for the best engraving quality. The position of your graphics on Inkscape canvas is irrelevant. This is one of the reasons why a generic Gcode file may not work. The origin (X=0,Y=0) could be in the centre or top-left of the maximum engraving range depending on the model. This extension warns if the target graphics are larger than allowed engraving range, and you should scale it down and try again. It is noted in the dropdown list of the entension for your reference. Maximum engraving range depends on the model of your LP. (0=off, which makes the Gcode useless, so I disallowed it.) Laser power can be set from 1 (min) to 255 (max).I tested speeds from 0.01mm/min to 70mm/min and they all came out the same on the engraver end. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |